But the tool only works if the device bootloader unlocked.** **The Realme Flash Tool currently supports Realme X50 Pro, Realme X2 Pro, Realme X2, Realme X, Realme 3, and Realme 3i in the latest version. You can get the OFP file from the Realme official forum page. Support OFP files: The official tool support OFP packages, which are different from the OZIP file. The company has officially said that flashing Firmware through Realme Flash Tool will fix the Fingerprint not working issue. So, the tool will support Realme C1, Realme 1, Realme 2, Realme 2 Pro, Realme 3, Realme 3 Pro, Realme 5, Realme 5 Pro, Realme X, Realme XT, and Realme U1, Realme X2 Pro and other Realme Phones.įix Fingerprint Problem: Realme Flash Tool also fixes the issue on Realme devices that appears after unlocking the bootloader. But Realme officials have confirmed that they will extend support for other Realme devices as well.

Wide Range of Devices: The first build or first version of the Realme flash tool currently supports Realme X50 Pro.

This test will now appear in the list of applicable tests for the selected system target in HLK studio.

Click on the check box to enable this optional feature.

Scroll down to select the feature named:.

A Device Feature List window will open up.

Right click on the selected system target.

It will not appear in the list of tests in HLK studio for a system target by default.Optional: To enable it to show up in the list of tests for system target in HLK studio, run the following steps: Note: This test is associated with an optional feature: 64DesktopHardware.

Set Boot from USB to enabled in UEFI menu.

Flashing should complete successfully, all commands should exit with 'Status: 0 The operation complete successfully'.

From an administrative command prompt, run the following commands:emmcdl - p COMxx - f prog_ufs_firehose_8998_ddr.elf - memoryname ufs - x rawprogram0.xmlemmcdl - p COMxx - f prog_ufs_firehose_8998_ddr.elf - memoryname ufs - x rawprogram1.xmlemmcdl - p COMxx - f prog_ufs_firehose_8998_ddr.elf - memoryname ufs - x rawprogram2.xmlemmcdl - p COMxx - f prog_ufs_firehose_8998_ddr.elf - memoryname ufs - x rawprogram3.xmlemmcdl - p COMxx - f prog_ufs_firehose_8998_ddr.elf - memoryname ufs - x rawprogram4.xmlemmcdl - p COMxx - f prog_ufs_firehose_8998_ddr.elf - memoryname ufs - x rawprogram5.xml.

The device should enumerate as Qualcomm HS - USB QDLoader endpoint on a COM port

Attach the device to host PC using a regular USB cable.

There will be no indication that the device is on (dark display).

Or enter EDL mode using UEFI menu at boot.

Or use jumper # 6 in S4 on debug board to force device into EDL mode.

Either device has to have an empty EMMC (out of box or JTAG wiped).

Boot the device into Emergency Download mode (EDL).

Msm download tool registration